Replacement controllers and sensors
EURDOW web guides are fitted as standard to many label and converting machines built in China. If the controller or edge sensor on your machine needs replacing, you can order the matching part directly from us. Find the model on its label, check the table below, then send us a photo.
Find the model
The label on the controller or sensor shows the Type (model) and the SN (serial number). Take a clear photo of the label. If the label is missing or unreadable, send photos of the front panel and the cable connector and we will identify the part.
Match the replacement
Order by the model on the label. Controllers and sensors are paired by signal type, so a part from the other family will not work.
| On your machine | Order | Notes |
|---|---|---|
| WGC02 | WGC01 | LCD controller, analog sensor inputs. Discontinued. WGC01 is the factory replacement and is electrically interchangeable. The panel cut-out changes from 111 to 112 mm. TB-WGC01-01 |
| WGC01 | WGC01 | Colour-display controller, analog sensor inputs. Tell us whether it sits on a guide frame or is mounted separately, for example on a slitter unwind. The two versions differ in the rear housing. |
| WFC01 | WFC01 | Colour-display controller, digital sensor inputs. Works with EDS-02 sensors. Specifications |
| EDS-02 | EDS-02 | Ultrasonic edge sensor, digital signal. For WFC01 and WFC02 controllers. Specifications |
| EDS-03 | EDS-03 | Ultrasonic edge sensor, analog signal. For WGC01 and WGC02 controllers. Same housing as EDS-02 but a different signal, so the two are not interchangeable. |
Another model, or not sure what you have? Send a photo and we will tell you what to order.
Send the request
- A photo of the label
- Quantity
- Machine maker and model, if you know them
- Delivery country
Photos are easiest on WhatsApp. You can also use the enquiry form and we will reply by email.